Datasheet4U Logo Datasheet4U.com

CL6807 - 30V 1A LED driver

Description

The CL6807 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage.

Features

  • Simple low parts count Wide input voltage range: 8V to 30V Up to 1A output current Single pin on/off and brightness control using DC voltage or PWM Typical 5% output current accuracy Inherent open-circuit LED protection High efficiency (up to 95%) High-Side Current Sense Soft-start Available in SOT89-5 packages.

📥 Download Datasheet

Datasheet preview – CL6807

Datasheet Details

Part number CL6807
Manufacturer Chip Link
File Size 248.57 KB
Description 30V 1A LED driver
Datasheet download datasheet CL6807 Datasheet
Additional preview pages of the CL6807 datasheet.

📁 Similar Datasheet

  • CL6807 - 5V built-in MOS tube 1A high-power LED driver (ETC)
  • CL680 - C-CUBE MICROSYSTEM / Video-CD Decoder (LSI Logic)
  • CL6808 - 1.2A LED driver (CHIPLINK)
  • CL6808 - 35V breakdown voltage 1.2A drive capability High Power LED Driver (icdemi)
  • CL6 - Fixed Constant Current LED Driver (Supertex)
  • CL6017S - Broadcast FM Radio Receiver (Chipkingdom Electronics)
  • CL60x - Hermetically Sealed 1/4 Inch Diameter Calss Case (Senisys)
  • CL616BA - MOSFET (UNIKC)
  • CL65 - Wet Tantalum Capacitors (MALLORY)
  • CL65BB - Wet Tantalum Capacitors (MALLORY)
Other Datasheets by Chip Link
  • CL6201 - High efficiency white LED driver

Full PDF Text Transcription

Click to expand full text
www.DataSheet.co.kr CHIPLINK SEMICONDUCTOR CL6807 30V 1A LED driver with internal switch GENERAL DESCRIPTION The CL6807 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 7V and 30V and provides an externally adjustable output current of up to 1A. Depending upon supply voltage and external components, this can provide up to 35 watts of output power. The CL6807 includes the output switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current.
Published: |