Datasheet4U Logo Datasheet4U.com

CM3706 - Synchronous Step-Down Regulator

Description

The CM3706 is a 1.5MHz constant frequency, slope compensated current mode PWM step-down converter.

The device integrates a main switch and a synchronous rectifier for high efficiency without an external Schottky diode.

Features

  • ES.
  • High Efficiency: Up to 96% 1.5Mhz Constant Switching Frequency 600mA Output Current at VIN=3V Integrated Main switch and synchronous rectifier. No Schottky Diode Required 2.5V to 5.5V Input Voltage Range Output Voltage as Low as 0.6V 100% Duty Cycle in Dropout Low Quiescent Current: 300µA Slope Compensated Current Mode Control for Excellent Line and Load Transient Response Short Circuit Protection Thermal Fault Protection.

📥 Download Datasheet

Datasheet Details

Part number CM3706
Manufacturer Champion
File Size 410.29 KB
Description Synchronous Step-Down Regulator
Datasheet download datasheet CM3706 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CM3702 Micropower Low-Noise Charge-Pump and Linear Regulator California Micro Devices
CM3002 Micropower 1.0A Low Dropout CMOS Regulators California Micro Devices
CM3003 1.5 Amp Dual Mode Low Dropout CMOS Regulator California Micro Devices
CM3004 1.0 Amp Dual Mode Low-Dropout CMOS Regulator California Micro Devices
CM300DC-24NFM Dual IGBT Powerex

Other Datasheets by Champion

Part Number Description
CM3706A 600mA Synchronous Step-Down Regulator
CM3708 3A LOW-NOISE PWM STEP-DOWN REGULATOR
CM3708A 3A LOW-NOISE PWM STEP-DOWN REGULATOR
CM3718 1.5A LOW-NOISE PWM STEP-DOWN REGULATOR
CM3718C 1.5A LOW-NOISE PWM STEP-DOWN REGULATOR

Full PDF Text Transcription

Click to expand full text
CM3706 1.5MHz, 600mA Synchronous Step-Down Regulator GENERAL DESCRIPTION The CM3706 is a 1.5MHz constant frequency, slope compensated current mode PWM step-down converter. The device integrates a main switch and a synchronous rectifier for high efficiency without an external Schottky diode. It is ideal for powering portable equipment that runs from a single cell lithium-Ion (Li+) battery. The CM3706 can supply 600mA of load current from a 2.5V to 5.5V input voltage. The output voltage can be regulated as low as 0.6V. The CM3706 can also run at 100% duty cycle for low dropout operation, extending battery life in portable system. Idle mode operation at light loads provides very low output ripple voltage for noise sensitive applications.
Published: |