Datasheet4U Logo Datasheet4U.com

V7PA-03A - NON-ISOLATED DC/DC CONVERTERS

General Description

The Bel V7PA-03A series modules are non-isolated, step down DC/DC power converters that operate from a nominal 12V source.

These converters are available in a range of output voltages from 1.5V to 3.3V.

They are packaged in a single-in-line footprint and provide a maximum 3A output.

Key Features

  • include remote on/off, over current protection and output voltage adjust. These products may be used almost anywhere low-voltage silicon is employed and a 12V source is available. Typical.

📥 Download Datasheet

Datasheet Details

Part number V7PA-03A
Manufacturer Bel Fuse
File Size 505.92 KB
Description NON-ISOLATED DC/DC CONVERTERS
Datasheet download datasheet V7PA-03A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by Bel Fuse

Part Number Description
V7PB-06B NON-ISOLATED DC/DC CONVERTERS
V7PB-10A NON-ISOLATED DC/DC CONVERTERS
V7PB-10B NON-ISOLATED DC/DC CONVERTERS
V7PB-10C NON-ISOLATED DC/DC CONVERTERS
V7PB-10D NON-ISOLATED DC/DC CONVERTERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com NON-ISOLATED DC/DC CONVERTERS 12V Input / 1.5 – 3.3V Output / 3A V7PA-03A Series • • • • • • • Nonisolated Fixed frequency High efficiency means less power dissipation Optimized for cost Remote on/off Undervoltage lockout Over current and short circuit protection POWER PRODUCTS BP01V7PA-03A Description The Bel V7PA-03A series modules are non-isolated, step down DC/DC power converters that operate from a nominal 12V source. These converters are available in a range of output voltages from 1.5V to 3.3V. They are packaged in a single-in-line footprint and provide a maximum 3A output. Standard features include remote on/off, over current protection and output voltage adjust.