BL13232E Datasheet PDF (250kbps RS-232 Transceivers)

General Description

The BL13232E consists of two drivers, two receivers, and a dual charge-pump circuit with ±12kV IEC 61000-4-2 Contact Discharge ESD protection.

Key Features

ESD protection for RS-232 Bus Pins.
±12kV (IEC61000-4-2, Contact Discharge).
±15kV (IEC61000-4-2, Air-Gap Discharge).
Meets the Requirements of TIA/EIA-232-F standard.
Wide Power Supply Range: Single +3V to +5.5V.
Operates up to 250kbps.
Two Drivers and Two Receivers.
External Capacitors: 4 × 0.1 μF.
Accepts 5V Logic Input With 3.3V Supply Function Block.

Datasheet Details

Part number	BL13232E
Manufacturer	BELLING
File Size	625.42 KB
Description	250kbps RS-232 Transceivers
Datasheet	BL13232E Datasheet

Part number

BL13232E

Manufacturer

BELLING

File Size

625.42 KB

Description

250kbps RS-232 Transceivers

Datasheet

BL13232E Datasheet

Other Datasheets by BELLING

Part Number	Description
BL1361	D class amplifier integrated USB audio controller
BL1361S	Simple Class D amplifier integrated USB audio controller
BL1084	5A Bipolar Linear Regulator
BL10N65A	Power Mosfet
BL10N80	Power MOSFET
BL1110A	Low voltage versatile transmission IC
BL1117C	1A Bipolar Linear Regulator
BL1118	Dual 1A Low Dropout Regulator
BL1511	Video Filter Driver
BL1511B	Video Filter Driver

Part Number

Description

BL1361

D class amplifier integrated USB audio controller

BL1361S

Simple Class D amplifier integrated USB audio controller

BL1084

5A Bipolar Linear Regulator

BL10N65A

Power Mosfet

BL10N80

Power MOSFET

BL1110A

Low voltage versatile transmission IC

BL1117C

1A Bipolar Linear Regulator

BL1118

Dual 1A Low Dropout Regulator

BL1511

Video Filter Driver

BL1511B

Video Filter Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

BL13232E 3V to 5.5V，250kbps RS-232 Transceivers Description The BL13232E consists of two drivers, two receivers, and a dual charge-pump circuit with ±12kV IEC 61000-4-2 Contact Discharge ESD protection. The BL13232E meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3V to 5.5V supply. The device operates at data signaling rates up to 250 kbps. The BL13232E is available in SOP16 and TSSOP16 package.