Datasheet4U Logo Datasheet4U.com

AP4300 - QUAD OP AMP AND VOLTAGE REFERENCE

General Description

The AP4300 is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies.

The device contains two operational amplifiers and a precision shunt regulator.

Key Features

  • increased precision with a corresponding reduction in system complexity and cost. The AP4300 is available in standard packages of DIP8 and SOIC-8. AP4300 Features Op Amp.
  • Input Offset Voltage: 0.5mV.
  • Supply Current: 250µA per Op Amp at 5.0V Supply Voltage.
  • Unity Gain Bandwidth: 1MHz.
  • Output Voltage Swing: 0 to (VCC-1.5) V.
  • Power Supply Range: 3 to 18V Voltage Reference.
  • Fixed Output Voltage Reference: 2.5V, 2.6V.
  • Voltage Tolerance: 0.5%, 1%.
  • Sink Curren.

📥 Download Datasheet

Datasheet Details

Part number AP4300
Manufacturer BCD Semiconductor
File Size 188.14 KB
Description QUAD OP AMP AND VOLTAGE REFERENCE
Datasheet download datasheet AP4300 Datasheet

Other Datasheets by BCD Semiconductor

Part Number Description
AP4301 QUAD OP AMP AND VOLTAGE REFERENCE
AP4302 QUAD OP AMP AND VOLTAGE REFERENCE
AP4303 QUAD OP AMP AND VOLTAGE REFERENCE
AP4305 CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER
AP4310 DUAL OP AMP AND VOLTAGE REFERENCE
AP4313 CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER
AP4340 DYNAMIC PSR ACCELERATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet DUAL OP AMP AND VOLTAGE REFERENCE General Description The AP4300 is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies. The device contains two operational amplifiers and a precision shunt regulator. Op Amp 1 is designed for voltage control, whose non-inverting input internally connects to the output of the shunt regulator. Op Amp 2 is for current control with both inputs uncommitted. The IC offers the power converter designer a control solution that features increased precision with a corresponding reduction in system complexity and cost. The AP4300 is available in standard packages of DIP8 and SOIC-8. AP4300 Features Op Amp · Input Offset Voltage: 0.