IQS211
Features
- Pin patible with IQS127/128/227/228
- Automatic Tuning Implementation (ATI)
- On-chip movement detection algorithm
- Forced activation when movement detected
- Minimal external ponents
- 25mm detection distance
- Up to 60p F sensor load (with effective movement detection)
- Multiple One-Time-Programmable (OTP) options
- Standalone direct outputs: o Primary output (configurable) Default: ACTIVATION o Secondary output (configurable) Default: MOVEMENT
- Standard I2C interface (polling)
- Alternate I2C interfaces (Ready signal integrated onto I2C clock line): o I2C configuration at start-up with standalone runtime operation o I2C with wake-up
- 1-Wire streaming interface: o 1-Wire & event CLK signal
Ro HS2 pliant
6 pin TSOT23-6
Representations only, not actual markings
- Special configurations: o Activation based on capacitive load at power-on
- Separate MOVEMENT output selection: Pulse Frequency Modulation (PFM, default), Pulse Width Modulation (PWM), Latched, or PWM only...
