Datasheet4U Logo Datasheet4U.com

SAMG53G19A - SMART ARM-based Flash MCU

Download the SAMG53G19A datasheet PDF. This datasheet also covers the SAMG53G variant, as both devices belong to the same smart arm-based flash mcu family and are provided as variant models within a single manufacturer datasheet.

Description

The Atmel® | SMART SAM G53 is a series of Flash microcontrollers based on the high-performance 32-bit ARM® Cortex®-M4 RISC processor.

Features

  • up to 512 Kbytes of Flash and 96 Kbytes of SRAM. The peripheral set includes one USART, two UARTs, three I2C-bus interfaces (TWI), up to two SPIs, two three-channel general-purpose 16-bit timers, two I2S controllers with two-way, one-channel pulse density modulation, one realtime timer (RTT) and one 8-channel 12-bit ADC. The Atmel | SMART SAM G53 devices have two software-selectable low-power modes: Sleep and Wait. In Sleep mode, the processor is stopped while all other functions can be kept run.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (SAMG53G-Atmel.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
SAM-M8Q Easy-to-use u-blox M8 GNSS antenna u-blox
SAM20G 32-bit Cortex-M0+ MCU Microchip
SAM20HF HIGH VOLTAGE HYPER FAST RECTIFIER SSDI
SAM20HFSMS HIGH VOLTAGE HYPER FAST RECTIFIER SSDI
SAM212M05BF1 3-phase Motor Driver Sanken

Other Datasheets by Atmel (Microchip)

Part Number Description
SAMG53G19B SMART ARM-based Flash MCU
SAMG53G SMART ARM-based Flash MCU
SAMG53N SMART ARM-based Flash MCU
SAMG53N19A SMART ARM-based Flash MCU
SAMG53N19B SMART ARM-based Flash MCU

Full PDF Text Transcription

Click to expand full text
SAM G53G / SAM G53N Atmel | SMART ARM-based Flash MCU DATASHEET Description The Atmel® | SMART SAM G53 is a series of Flash microcontrollers based on the high-performance 32-bit ARM® Cortex®-M4 RISC processor. It operates at a maximum speed of 48 MHz and features up to 512 Kbytes of Flash and 96 Kbytes of SRAM. The peripheral set includes one USART, two UARTs, three I2C-bus interfaces (TWI), up to two SPIs, two three-channel general-purpose 16-bit timers, two I2S controllers with two-way, one-channel pulse density modulation, one realtime timer (RTT) and one 8-channel 12-bit ADC. The Atmel | SMART SAM G53 devices have two software-selectable low-power modes: Sleep and Wait. In Sleep mode, the processor is stopped while all other functions can be kept running.
Published: |