Datasheet4U Logo Datasheet4U.com

HMC716LP3E - GAAS PHEMT MMIC

Description

The HMC716LP3E is a GaAs pHEMT MMIC Low Noise Ampli er that is ideal for xed wireless and LTE/WiMAX/4G basestation front-end receivers operating between 3.1 and 3.9 GHz.

The ampli er has been optimized to provide 1 dB noise gure, 18 dB gain and +33 dBm output IP3 from a single supply of +5V.

Features

  • The HMC716LP3E is ideal for: Noise Figure: 1 dB.
  • Fixed Wireless and LTE/WiMAX/4G Gain: 18 dB.
  • BTS & Infrastructure Output IP3: +33 dBm.
  • Repeaters and Femtocells.
  • Public Safety Radio.
  • Access Points OLETE Functional Diagram Single Supply: +3V to +5V 50 Ohm Matched Input/Output 16 Lead 3x3mm QFN Package: 9 mm2 General.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HMC716LP3 Low Noise Amplifier SMT Hittite Microwave Corporation
HMC712 Voltage Variable Attenuator Chip Hittite Microwave Corporation
HMC712LP3CE Voltage Variable Attenuator SMT Hittite Microwave Corporation
HMC713LP3E LOGARITHMIC DETECTOR / CONTROLLER Hittite Microwave Corporation
HMC714LP5 Dual RMS Power Detector Hittite Microwave Corporation

Other Datasheets by Analog Devices

Part Number Description
HMC716ALP3E GaAs PHEMT MMIC LOW NOISE AMPLIFIER
HMC710LC5 GaAs MMIC I/Q UPCONVERTER
HMC711LC5 GaAs MMIC
HMC712ALP3C GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR
HMC712LP3C GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR

Full PDF Text Transcription

Click to expand full text
HMC716LP3E v03.1113 GAAS PHEMT MMIC LOW NOISE AMPLIFIER, 3.1 - 3.9GHz LOW NOISE AMPLIFIERS - SMT Typical Applications Features The HMC716LP3E is ideal for: Noise Figure: 1 dB • Fixed Wireless and LTE/WiMAX/4G Gain: 18 dB • BTS & Infrastructure Output IP3: +33 dBm • Repeaters and Femtocells • Public Safety Radio • Access Points OLETE Functional Diagram Single Supply: +3V to +5V 50 Ohm Matched Input/Output 16 Lead 3x3mm QFN Package: 9 mm2 General Description The HMC716LP3E is a GaAs pHEMT MMIC Low Noise Ampli er that is ideal for xed wireless and LTE/WiMAX/4G basestation front-end receivers operating between 3.1 and 3.9 GHz. The ampli er has been optimized to provide 1 dB noise gure, 18 dB gain and +33 dBm output IP3 from a single supply of +5V.
Published: |