Datasheet4U Logo Datasheet4U.com

HMC377QS16G - CELLULAR HIGH IP3 RFIC DOWNCONVERTER

Description

The HMC377QS16G & HMC377QS16GE are linear downconverter receiver ICs suitable for cellular infrastructure applications from 0.8 - 1.0 GHz.

An integrated mixer coupled with a high dynamic range IF amplifier achieves an input intercept point (IP3) of +15 dBm, and an input P1dB of +3.5 dBm.

Features

  • The HMC377QS16G / HMC377QS16GE is ideal for: +15 dBm Input IP3, +29 dBm Output IP3.
  • GSM & CDMA Infrastructure Low LO Drive: -5 dBm LO 8.
  • GPRS & EDGE Infrastructure Conversion Gain: 14 dB.
  • Wireless Data/CDPD Noise Figure: 11 dB MIXERS -.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HMC374 SMT PHEMT LOW NOISE AMPLIFIER Hittite Microwave
HMC374E SMT PHEMT LOW NOISE AMPLIFIER Hittite Microwave
HMC300LM1 SMT MEDIUM POWER GaAs MMIC Hittite Microwave Corporation
HMC304MS8 GaAs MMIC Hittite Microwave Corporation
HMC305LP4 0.5 dB LSB GaAs MMIC Hittite Microwave Corporation

Other Datasheets by Analog Devices

Part Number Description
HMC377QS16GE CELLULAR HIGH IP3 RFIC DOWNCONVERTER
HMC370LP4 SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER
HMC370LP4E SMT GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER
HMC3716LP4E HBT DIGITAL PHASE FREQUENCY DETECTOR
HMC372LP3 GaAs PHEMT MMIC LOW NOISE AMPLIFIER

Full PDF Text Transcription

Click to expand full text
HMC377QS16G / 377QS16GE v02.0207 CELLULAR HIGH IP3 RFIC DOWNCONVERTER, 0.8 - 1.0 GHz Typical Applications Features The HMC377QS16G / HMC377QS16GE is ideal for: +15 dBm Input IP3, +29 dBm Output IP3 • GSM & CDMA Infrastructure Low LO Drive: -5 dBm LO 8 • GPRS & EDGE Infrastructure Conversion Gain: 14 dB • Wireless Data/CDPD Noise Figure: 11 dB MIXERS - DOWNCONVERTERS - SMT LETE Functional Diagram Positive Supply: +5V @ 135 mA General Description The HMC377QS16G & HMC377QS16GE are linear downconverter receiver ICs suitable for cellular infrastructure applications from 0.8 - 1.0 GHz. An integrated mixer coupled with a high dynamic range IF amplifier achieves an input intercept point (IP3) of +15 dBm, and an input P1dB of +3.5 dBm. The converter provides a gain of 13.
Published: |