AD725 Datasheet Low Cost RGB to NTSC/PAL Encoder with Luma Trap Port

Manufacturer: Analog Devices

AD725 low cost rgb to ntsc/pal encoder with luma trap port by Analog Devices - Datasheet Preview

Datasheet Details

Part number	AD725
Manufacturer	Analog Devices
File Size	347.58 KB
Description	Low Cost RGB to NTSC/PAL Encoder with Luma Trap Port
Download	AD725 Download (PDF)

General Description

The AD725 is a very low cost general purpose RGB to NTSC/ PAL encoder that converts red, green and blue color component signals into their corresponding luminance (baseband amplitude) and chrominance (subcarrier amplitude and phase) signals in accordance with either NTSC or PAL standards.

These two outputs are also combined on-chip to provide a composite video output.

All three outputs are available separately at voltages of twice the standard signal levels as required for driving 75 Ω, reverse-terminated cables.

Overview

Key Features

Composite Video Output: Both NTSC and PAL Chrominance and Luminance (S-Video) Outputs Luma Trap Port to Eliminate Cross Color Artifacts TTL Logic Levels Integrated Delay Line and Auto-Tuned Filters Drives 75 ⍀ Reverse-Terminated Loads Low Power +5 V Operation Power-Down to.

More Datasheets from Analog Devices

Part Number	Description
AD720	RGB to NTSC/PAL Encoders
AD721	RGB to NTSC/PAL Encoders
AD722	RGB to NTSC/PAL Encoder
AD7224	8-Bit DAC
AD7225	LC2MOS Quad 8-Bit DAC with Separate Reference Inputs
AD7226	Quad 8-Bit D/A Converter
AD7228	LC2MOS Octal 8-Bit DAC
AD7228A	LC2MOS Octal 8-Bit DAC
AD723	2.7 V to 5.5 V RGB-to-NTSC/PAL Encoder with Load Detect and Input Termination Switch
AD7233	LC2MOS 12-Bit Serial Mini-DIP DACPORT