Datasheet4U Logo Datasheet4U.com

AD5930 Datasheet Programmable Frequency Sweep and Output Burst Waveform Generator

Manufacturer: Analog Devices

📥 Download Datasheet

General Description

The AD59301 is a waveform generator with programmable frequency sweep and output burst capability.

Utilizing embedded digital processing that allows enhanced frequency control, the device generates synthesized analog or digital frequency-stepped waveforms.

Because frequency profiles are preprogrammed, continuous write cycles are eliminated and thereby free up valuable DSP/µcontroller resources.

Overview

www.DataSheet4U.com Programmable Frequency Sweep and Output Burst Waveform Generator.

Key Features

  • Programmable frequency profile No external components necessary Output frequency up to 25 MHz Burst and listen capability Preprogrammable frequency profile minimizes number of DSP/µcontroller writes Sinusoidal/triangular/square wave outputs Automatic or single pin control of frequency stepping Waveform starts at known phase Increments at 0° phase or phase continuously Power-down mode: 20 µA Power supply: 2.3 V to 5.5 V Automotive temperature range:.
  • 40°C to +125°C 20-lead pb-free TSSOP.

More Datasheets from Analog Devices

Part Number Description
AD5932 Programmable Frequency Scan Waveform Generator
AD5933 1 MSPS 12-Bit Impedance Converter
AD5934 12-Bit Impedance Converter
AD590 2-Terminal IC Temperature Transducer
AD592 Low Cost / Precision IC Temperature Transducer
AD594 Monolithic Thermocouple Amplifiers with Cold Junction Compensation
AD5940 High Precision Impedance and Electrochemical Front-End
AD5941 High Precision Impedance and Electrochemical Front-End
AD595 Monolithic Thermocouple Amplifiers with Cold Junction Compensation
AD596 Thermocouple Conditioner and Setpoint Controller