Datasheet Details
| Part number | AD5315 |
|---|---|
| Manufacturer | Analog Devices |
| File Size | 371.55 KB |
| Description | 8-/10-/12-Bit DACs |
| Download | AD5315 Download (PDF) |
|
|
| Part number | AD5315 |
|---|---|
| Manufacturer | Analog Devices |
| File Size | 371.55 KB |
| Description | 8-/10-/12-Bit DACs |
| Download | AD5315 Download (PDF) |
|
|
|
AD5305: 4 buffered 8-bit DACs in 10-lead MSOP A version: ±1 LSB INL, B version: ±0.625 LSB INL AD5315: 4 buffered 10-bit DACs in 10-lead MSOP A version: ±4 LSB INL, B version: ±2.5 LSB INL AD5325: 4 buffered 12-bit DACs in 10-lead MSOP A version: ±16 LSB INL, B version: ±10 LSB INL Low power operation: 500 μA @ 3 V, 600 μA @ 5 V 2-wire (I2C®-compatible) serial interface 2.5 V to 5.5 V power supply Guaranteed monotonic by design over all codes Power-down to 80 nA @ 3 V, 200 nA @ 5 V Three power-down modes The AD5305/AD5315/AD53251 are quad 8-, 10-, and 12-bit buffered voltage output DACs in a 10-lead MSOP that operate from a single 2.5 V to 5.5 V supply, consuming 500 μA at 3 V.
Their on-chip output amplifiers allow rail-to-rail output swing with a slew rate of 0.7 V/μs.
A 2-wire serial interface that operates at clock rates up to 400 kHz is
2.5 V to 5.5 V, 500 μA, 2-Wire Interface Quad Voltage Output, 8-/10-/12-Bit.
| Part Number | Description |
|---|---|
| AD5310 | +2.7 V to +5.5 V/ 140 uA/ Rail-to-Rail Voltage Output 10-Bit DAC in a SOT-23 |
| AD5310R | 10-Bit nanoDAC |
| AD5311 | Voltage-Output 8-/10-/12-Bit DACs |
| AD5311R | 10-Bit nanoDAC |
| AD5312 | +2.5 V to +5.5 V/ 230 uA Dual Rail-to-Rail/ Voltage Output 8-/10-/12-Bit DACs |
| AD5313 | +2.5 V to +5.5 V/ 230 uA/ Dual Rail-to-Rail Voltage Output 8-/10-/12-Bit DACs |
| AD5313R | Dual 10-Bit nanoDAC |
| AD5314 | Quad Voltage Output 8-/10-/12-Bit DACs |
| AD5316 | 8-/10-/12-Bit DACs |
| AD5316R | Quad 10-Bit nanoDAC |