Datasheet4U Logo Datasheet4U.com

AD5304 Datasheet Quad Voltage Output 8-/10-/12-Bit DACs

Manufacturer: Analog Devices

📥 Download Datasheet

General Description

The AD5304/AD5314/AD53241 are quad 8-, 10-, and 12-bit buffered voltage output DACs in 10-lead MSOP and 10-lead LFCSP packages that operate from a single 2.5 V to 5.5 V supply, consuming 500 μA at 3 V.

Their on-chip output amplifiers allow rail-to-rail output swing to be achieved with a slew rate of 0.7 V/μs.

A 3-wire serial interface is used;

Overview

Data Sheet 2.5 V to 5.5 V, 500 μA, Quad Voltage Output 8-/10-/12-Bit DACs in 10-Lead Packages.

Key Features

  • AD5304: 4 buffered 8-Bit DACs in 10-lead MSOP and 10-lead LFCSP A, W Version: ±1 LSB INL, B Version: ±0.625 LSB INL AD5314: 4 buffered 10-Bit DACs in 10-lead MSOP and 10-lead LFCSP A, W Version: ±4 LSB INL, B Version: ±2.5 LSB INL AD5324: 4 buffered 12-Bit DACs in 10-lead MSOP and 10-lead LFCSP A, W Version: ±16 LSB INL, B Version: ±10 LSB INL Low power operation: 500 μA @ 3 V, 600 μA @ 5 V 2.5 V to 5.5 V power supply Guaranteed monotonic by design over all codes Power-down to 80 nA @ 3 V, 200 n.

More Datasheets from Analog Devices

Part Number Description
AD53040 Ultrahigh Speed Pin Driver
AD53041 High Speed Active Load
AD53042 High Speed Window Comparator
AD530 Integrated Circuit / Multiplier / Divider / Square Rooter
AD5300 8-Bit DAC
AD5301 Voltage-Output 8-/10-/12-Bit DACs
AD5302 +2.5 V to +5.5 V/ 230 uA Dual Rail-to-Rail/ Voltage Output 8-/10-/12-Bit DACs
AD53020 Four Channel ECL Delay Line
AD5303 +2.5 V to +5.5 V/ 230 uA/ Dual Rail-to-Rail Voltage Output 8-/10-/12-Bit DACs
AD53032 High Performance Driver/Comparator Active Load on a Single Chip