PD105 - PD Series / SMT Power Chock Core

Download the PD105 datasheet PDF. This datasheet also covers the PD104 variant, as both devices belong to the same pd series / smt power chock core family and are provided as variant models within a single manufacturer datasheet.

📥 Download Datasheet

PD105 pd series / smt power chock core by American Precision - Datasheet Preview — Note: The manufacturer provides a single datasheet file (PD104_AmericanPrecision.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number	PD105
Manufacturer	American Precision
File Size	86.61 KB
Description	PD Series / SMT Power Chock Core
Datasheet	PD105 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
PD10-0040-S	Two-Way Power Divider 10 - 500 MHz	Tyco Electronics
PD10-0041-S	Two-Way In-Phase Power Divider 0.4 - 400 MHz	Tyco Electronics
PD10-0042-S	Two-Way In-Phase Power Divider 10-2000 MHz	Tyco Electronics
PD100	InGaAs Photodiode	ANADIGICS
PD10012	(PD10012 / PD10016) DIODE MODULE	Nihon Inter Electronics

Other Datasheets by American Precision

Part Number	Description
PD104	PD Series / SMT Power Chock Core

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

m o SMT Power Choke Core .c U 4 t e e h S a at .D w w w PD Series * Test Measurement Frequency Values < 10µH tested @ 7.96 MHz; Values ≥10uH tested @ 100 KHz Mechanical Conﬁguration Units designed for Surface Mounting Terminals Solder Coated with SN63 solder Core Construction High Resistivity Ferrite Operating Temperature Range –55°C to +125°C Current Rating at 25°C Ambient The maximum DC Current that will cause a 40°C maximum temperature rise and where the inductance will not decrease by more than 10% from the zero DC value. Inductance Tolerance Tolerance is indicated by the suffix to API part number. Standard tolerance per part number is as shown in table. M = ±20%; K = ±10%. Additional Information on Next Page Physical Parameters Dimensions Inches PD43 A 0.165 ±0.024 B 0.137 MAX.