ATS642LSH - Peak-Detecting Gear Tooth Sensor

Product Overview

Allegro MicroSystems

Datasheet Details

Part number	ATS642LSH
Manufacturer	Allegro MicroSystems
File Size	649.03 KB
Description	Peak-Detecting Gear Tooth Sensor
Datasheet	ATS642LSH Datasheet
Additional preview pages of the ATS642LSH datasheet.

Product details

Description

The ATS642LSH is an optimized Hall effect sensing integrated circuit and magnet combination that provides a user-friendly solution for true zero-speed digital gear-tooth sensing in twowire applications.

Features

Running mode calibration for continuous optimization.
Single chip IC for high reliability.
Internal current regulator for 2-wire operation.
Small mechanical size (8 mm diameter × 5.5 mm depth).
Precise duty cycle signal over operating temperature range.
Large operating air gaps.
Automatic Gain Control (AGC) for air gap independent switchpoints.
Automatic Offset Adjustment (AOA) for signal processing optimization.
True zero-speed operation.
Under.

📁 Similar Datasheet

ATS601LSG - Single-Element Tooth-Detecting Speed Sensor (Allegro)
ATS617LSG - Differential Hall Effect Gear Tooth Sensor (Allegro Micro Systems)
ATS667LSG - High Accuracy Gear Tooth Sensor (Allegro Micro Systems)
ATS668LSM - True Zero-Speed High-Accuracy Gear Tooth Sensor (Allegro)
ATS679LSL - Self-Calibrating TPOS Camshaft Speed Sensor (Allegro)
ATS682LSH - True Zero Speed Differential Peak-Detecting Sensor (Allegro Micro Systems)
ATS684LSN - Differential Gear Tooth Sensor (Allegro)
ATS692LSH - Vibration Resistant Sensor (Allegro)

Other Datasheets by Allegro MicroSystems

ATS640JSB - DIFFERENTIAL HALL-EFFECT GEAR-TOOTH SENSOR IC
ATS643LSH - Zero-Speed Differential Gear Tooth Sensor
ATS645LSH - True Zero Speed Miniature Gear Tooth Sensor
ATS605LSG - Dual Output Differential Speed and Direction Sensor
ATS610LSA - HALL-EFFECT GEAR-TOOTH SENSOR ICS
ATS610LSC - ZERO-SPEED/ SELF-CALIBRATING/ NON-ORIENTED/ HALL-EFFECT GEAR-TOOTH SENSOR

Published: Apr 7, 2015 |