Datasheet4U Logo Datasheet4U.com

8902A - 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER WITH BACK-EMF SENSING

General Description

Power Outputs.

The power outputs of the A8902CLBA are n-channel DMOS transistors with a total source plus sink rDS(on) of typically 1 Ω.

Internal charge pump boost circuitry provides voltage above supply for driving the high-side DMOS gates.

Key Features

  • and modes of operation, such as the speed control parameters, startup current limit, sleep mode, diagnostic modes, and others. The A8902CLBA is fabricated in Allegro’s BCD (Bipolar CMOS DMOS) process, an advanced mixed-signal technology that combines bipolar, analog and digital CMOS, and DMOS power devices. The A8902CLBA is provided in a 24-lead wide-body SOIC batwing package. It provides for the smallest possible construction in surface-mount.

📥 Download Datasheet

Datasheet Details

Part number 8902A
Manufacturer Allegro MicroSystems
File Size 156.61 KB
Description 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER WITH BACK-EMF SENSING
Datasheet download datasheet 8902A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
89024 ARCHITECTURAL OVERVIEW 2400 BPS INTELLIGENT MODEM CHOP SET Intel Corporation
89000 50V CERAMIC DISC NTE Electronics

Other Datasheets by Allegro MicroSystems

Part Number Description
8904 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER
8905 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER WITH BACK-EMF SENSING
8906 BIDIRECTIONAL 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER WITH BACK-EMF SENSING
8909 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER WITH BACK-EMF SENSING AND POWER DMOS OUTPUTS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
8902–A 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER WITH BACK-EMF SENSING LOAD SUPPLY C D2 C WD CST OUTA GROUND GROUND OUT B OUT C CENTERTAP BRAKE C RES 1 2 V BB COMMUTATION DELAY 24 23 C D1 DATA IN CLOCK CHIP SELECT RESET GROUND GROUND DATA OUT OSCILLATOR LOGIC SUPPLY SECTOR DATA FILTER Data Sheet 26301.2 SERIAL PORT 3 4 5 6 7 8 9 9 10 11 12 BOOST CHARGE PUMP 22 21 20 19 18 The A8902CLBA is a three-phase brushless dc motor controller/ driver for use in 5 V or 12 V hard-disk drives. The three half-bridge outputs are low on-resistance n-channel DMOS devices capable of driving up to 1.25 A. The A8902CLBA provides complete, reliable, self-contained back-EMF sensing motor startup and running algorithms.