Datasheet4U Logo Datasheet4U.com

3361 - HALL-EFFECT SWITCHES

General Description

Chopper-Stabilized Technique.

The Hall element can be considered as a resistor array similar to a Wheatstone bridge.

A large portion of the offset is a result of the mismatching of these resistors.

📥 Download Datasheet

More Datasheets from Allegro MicroSystems

Part Number Description

Full PDF Text Transcription for 3361 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for 3361. For precise diagrams, tables, and layout, please refer to the original PDF.

View original datasheet text
3361 AND 3362 Suffix Code 'LH' Pinning 2-WIRE, CHOPPER-STABILIZED, HALL-EFFECT SWITCHES The A3361x and A3362x Hall-effect switches are extremely temperature-stable and stress-resistant sensors. Superior performance over temperature is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress. The two devices differ only in output polarity; the A3361x output current goes low in the presence of a south pole of sufficient strength; the A3362x output current goes high. Each device includes on a single silicon chip a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a constant-current open-collector output.