Datasheet4U Logo Datasheet4U.com

AT83C24B - Smart Card Reader Interface

General Description

The AT83C24 is a smart card reader interface IC for smart card reader/writer applications such as EFT/POS terminals and set top boxes.

It enables the management of any type of smart card from any kind of host.

Up to 8 AT83C24 can be connected in parallel using the programmable TWI address.

Key Features

  • Smart Card Interface.
  • Compliance with ISO 7816, EMV2000, GIE-CB, GSM and WHQL Standards Card Clock Stop High or Low for Card Power-down Modes Support Synchronous Cards with C4 and C8 Contacts Card Detection and Automatic de-activation Sequence Programmable Activation Sequence.
  • Direct Connection to the Smart Card Logic Level Shifters Short Circuit Current Limitation (see electrical characteristics) 8kV+ ESD Protection (MIL/STD 883 Class 3).
  • Programmable Voltag.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AT83C24 Smart Card Reader Interface ATMEL

Other Datasheets by Atmel (now Microchip Technology)

Part Number Description
AT83C24NDS Smart Card Reader Interface
AT83C21GC GemCore Serial Lite PRO
AT83C23OK CardMan Smart@Link
AT83C26 Multiple Smart Card Reader Interface
AT83C5103 Low-pin Count 8-bit Microcontroller
AT83C5112 8-bit Microcontroller with A/D Converter
AT83C5121 8-bit Microcontroller
AT83C5122 Smart Card Reader ICs
AT83C5122 (AT8xx512x) Smart Card Reader ICs
AT83C5123 Smart Card Reader ICs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Features • Smart Card Interface – Compliance with ISO 7816, EMV2000, GIE-CB, GSM and WHQL Standards Card Clock Stop High or Low for Card Power-down Modes Support Synchronous Cards with C4 and C8 Contacts Card Detection and Automatic de-activation Sequence Programmable Activation Sequence – Direct Connection to the Smart Card Logic Level Shifters Short Circuit Current Limitation (see electrical characteristics) 8kV+ ESD Protection (MIL/STD 883 Class 3) – Programmable Voltage 5V ±5% at 65 mA (Class A) 3V ±0.2V at 65 mA (Class B) 1.8V ±0.14V at 40 mA – Low Ripple Noise: < 200 mV Versatile Host Interface – ICAM (Conditional Access) Compatible – Two Wire Interface (TWI) Link Programmable Address Allow up to 8 Devices – Programmable Interrupt Output – Automatic Level Shifter (1.