Datasheet4U Logo Datasheet4U.com

74LVC1G66-Q100 - Bilateral switch

Description

The 74LVC1G66-Q100 is a single-pole, single-throw analog switch with two input/output terminals (nY and nZ) and a digital enable input (nE).

When nE is LOW, the analog switch is turned off.

Control inputs can be driven from either 3.3 V or 5 V devices.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 1.65 V to 5.5 V.
  • Very low ON resistance:.
  • 7.5 Ω (typical) at VCC = 2.7 V.
  • 6.5 Ω (typical) at VCC = 3.3 V.
  • 6 Ω (typical) at VCC = 5 V.
  • Switch current capability of 32 mA.
  • High noise immunity.
  • CMOS low power consumption.
  • TTL interface comp.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC1G66 Bilateral switch NXP
74LVC1G00 SINGLE 2 INPUT POSITIVE NAND GATE Diodes
74LVC1G02 SINGLE 2 INPUT POSITIVE NOR GATE Diodes
74LVC1G04 SINGLE INVERTER Diodes
74LVC1G06 SINGLE INVERTER BUFFER/DRIVER Diodes

Other Datasheets by Nexperia

Part Number Description
74LVC1G66 Bilateral switch
74LVC1G00 Single 2-input NAND gate
74LVC1G00-Q100 Single 2-input NAND gate
74LVC1G02 Single 2-input NOR gate
74LVC1G02-Q100 Single 2-input NOR gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC1G66-Q100 Bilateral switch Rev. 4 — 12 January 2022 Product data sheet 1. General description The 74LVC1G66-Q100 is a single-pole, single-throw analog switch with two input/output terminals (nY and nZ) and a digital enable input (nE). When nE is LOW, the analog switch is turned off. Control inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. Schmitt-trigger action at control inputs makes the circuit tolerant of slower input rise and fall times. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |