Datasheet4U Logo Datasheet4U.com

74LVC1G17-Q100 - Single Schmitt trigger buffer

Description

The 74LVC1G17-Q100 is a single buffer Schmitt-trigger.

Inputs can be driven from either 3.3 V or 5 V devices.

This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 1.65 V to 5.5 V.
  • Overvoltage tolerant inputs to 5.5 V.
  • High noise immunity.
  • CMOS low power dissipation.
  • IOFF circuitry provides partial Power-down mode operation.
  • ±24 mA output drive (VCC = 3.0 V).
  • Latch-up performance exceeds 250 mA.
  • Direct inte.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC1G17 Single Schmitt-trigger buffer NXP
74LVC1G17 SINGLE SCHMITT-TRIGGER BUFFER Diodes
74LVC1G175 Single D-type flip-flop NXP Semiconductors
74LVC1G175-Q100 Single D-type flip-flop NXP
74LVC1G10 SINGLE 3 INPUT POSITIVE NAND GATE Diodes

Other Datasheets by Nexperia

Part Number Description
74LVC1G17 Single Schmitt trigger buffer
74LVC1G175 Single D-type flip-flop
74LVC1G175-Q100 Single D-type flip-flop
74LVC1G10 Single 3-input NAND gate
74LVC1G10-Q100 Single 3-input NAND gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC1G17-Q100 Single Schmitt trigger buffer Rev. 5 — 14 January 2022 Product data sheet 1. General description The 74LVC1G17-Q100 is a single buffer Schmitt-trigger. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |