SN74HCT574 - OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS

Texas Instruments

The SN74HCT574 by Texas Instruments is a OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS. Below is the official datasheet preview.

Datasheet Details

Part number	SN74HCT574
Manufacturer	Texas Instruments
File Size	1.49 MB
Description	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
Datasheet	SN74HCT574-etcTI.pdf
Additional preview pages of the SN74HCT574 datasheet.

These octal edge-triggered D-type flip-flops feature 3-state outputs designed specifically for bus driving.

Operating voltage range of 4.5 V to 5.5 V.
High-current 3-state noninverting outputs drive bus lines directly or up to 15 LSTTL loads.
Low power consumption, 80-μA max ICC.
Typical tpd = 22 ns.
±6-mA output drive at 5 V.
Low input current of 1 μA max.
Inputs are TTL-voltage compatible.
Bus-structured pinout 2.

📁 SN74HCT574 Similar Datasheet

SN74HCT06 - Hex Inverter (Lingxing Microelectronics)
SN74HC06 - Hex Inverter (Lingxing Microelectronics)
SN74HC182 - FUNCTION LOOK AHEAD CARRY GENERATOR (ST Microelectronics)
SN74HC423 - DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR (ST Microelectronics)
SN74H74N - Dual D-Type Flip-Flop (ETC)
SN74HSTL16918 - 9-Bit To 18-Bit HSTL-To-LVTTL Memory Address Latch (Rev. C) (ETCTI)
SN74101 - AND-OR Gate (ETC)
SN74102 - AND Gate (ETC)

Other Datasheets by Texas Instruments

Published: Nov 7, 2020 |