SN74HC74-EP - DUAL D-TYPE POSITIVE EDGE TRIGGERED FLIP-FLOP

Texas Instruments

The SN74HC74-EP by Texas Instruments is a DUAL D-TYPE POSITIVE EDGE TRIGGERED FLIP-FLOP. Below is the official datasheet preview.

📥 Download Datasheet

SN74HC74-EP DUAL D-TYPE POSITIVE EDGE TRIGGERED FLIP-FLOP by Texas Instruments - Datasheet Preview — Official preview page of the **SN74HC74-EP** DUAL D-TYPE POSITIVE EDGE TRIGGERED FLIP-FLOP datasheet (Texas Instruments).

Datasheet Details

Part number	SN74HC74-EP
Manufacturer	Texas Instruments
File Size	598.04 KB
Description	DUAL D-TYPE POSITIVE EDGE TRIGGERED FLIP-FLOP
Datasheet	SN74HC74-EP-etcTI.pdf
Additional preview pages of the SN74HC74-EP datasheet.

SN74HC74-EP Product details

Description

ORDERING INFORMATION The SN74HC74 device contains two independent D-type positive edge triggered flip-flops.A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs.When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements are transferred to the outputs on the positive going edge of the clock (CLK) pulse.Clock triggering occurs at a voltage level and is not directly related to the

Features

1.
Controlled Baseline.
One Assembly Site.
One Test Site.
One Fabrication Site.
Extended Temperature Performance of.
55°C to 125°C.
Enhanced Diminishing Manufacturing Sources (DMS) Support.
Enhanced Product-Change Notification.
Qualification Pedigree (1) (1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is no.

📁 SN74HC74-EP Similar Datasheet

SN74HC06 - Hex Inverter (Lingxing Microelectronics)
SN74HC182 - FUNCTION LOOK AHEAD CARRY GENERATOR (ST Microelectronics)
SN74HC423 - DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR (ST Microelectronics)
SN74HCT06 - Hex Inverter (Lingxing Microelectronics)
SN74H74N - Dual D-Type Flip-Flop (ETC)
SN74HSTL16918 - 9-Bit To 18-Bit HSTL-To-LVTTL Memory Address Latch (Rev. C) (ETCTI)
SN74101 - AND-OR Gate (ETC)
SN74102 - AND Gate (ETC)

Other Datasheets by Texas Instruments

SN74HC74-Q1 - DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOP
SN74HC74 - Dual D-Type Positive-Edge-Triggered Flip-Flops
SN74HC74D - Dual D-Type Positive-Edge-Triggered Flip-Flops
SN74HC74N - Dual D-Type Positive-Edge-Triggered Flip-Flops
SN74HC7001 - Quadruple 2-Input AND Gates
SN74HC7002 - Quadruple 2-Input NOR Gates

Published: Dec 22, 2019 |