SN64BCT374 - Octal EDGE-Triggered D-Type FLIP-FLOP

Name: SN64BCT374
SKU: SN64BCT374-1399752

Texas Instruments

The SN64BCT374 by Texas Instruments is a Octal EDGE-Triggered D-Type FLIP-FLOP. Below is the official datasheet preview.

Datasheet Details

Part number	SN64BCT374
Manufacturer	Texas Instruments
File Size	63.36 KB
Description	Octal EDGE-Triggered D-Type FLIP-FLOP
Datasheet	SN64BCT374-etcTI.pdf
Additional preview pages of the SN64BCT374 datasheet.

This 8-bit flip-flop

3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight flip-flops of the SN64BCT374 are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels that were set up at the data (D) inputs. A buffered output-enable (OE) input can be used to place the.

📁 SN64BCT374 Similar Datasheet

SN65004 - One Channel Direct Drive Speech Controller (SONiX Technology Company)
SN65007 - One Channel Direct Drive Speech Controller (SONiX Technology Company)
SN65010 - One Channel Direct Drive Speech Controller (SONiX Technology Company)
SN65012 - One Channel Direct Drive Speech Controller (SONiX Technology Company)
SN65016 - One Channel Direct Drive Speech Controller (SONiX Technology Company)
SN65020 - One Channel Direct Drive Speech Controller (SONiX Technology Company)
SN65031 - Two Channels Direct Drive Speech Controller (SONiX Technology Company)
SN65042 - Two Channels Direct Drive Speech Controller (SONiX Technology Company)

Other Datasheets by Texas Instruments

Published: Aug 30, 2019 |