Datasheet4U Logo Datasheet4U.com

LM3565 - High-Current Flash LED Driver

Description

The LM3565 is a 4 MHz fixed-frequency, current mode synchronous boost converter designed to drive two series flash LEDs at 930 mA.

A high-voltage current source allows the LEDs to be terminated to the GND plane eliminating the need for an additional return trace back to the IC.

Features

  • 1.
  • High Efficiency Synchronous Boost Converter.
  • Drives 2 LEDs in Series with up to 930 mA.
  • External Strobe Pin for Hardware Enabled Flash.
  • External Torch Pin for Hardware Enabled Torch.
  • Dedicated Transmit Interrupt Pin.
  • 8-Bit ADC for LED Voltage and Input Voltage Monitoring.
  • Automatic Diode Current Scale Back.
  • PWM Control in Flash and Assist Modes.
  • Fault Detection and Reporting.
  • 400 kHz I2C-Compatible Inter.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM356 LOW Voltage Audio Power Amplifier FCI
LM35 Precision Centigrade Temperature Sensors National Semiconductor
LM350 Three-terminal Positive Voltage Regulator Motorola
LM350 3-Amp Adjustable Regulators National Semiconductor
LM350 3 Amp Positive Adjustable Regulator Linear Technology

Other Datasheets by Texas Instruments

Part Number Description
LM3560 Synchronous Boost Flash Driver
LM3561 Synchronous Boost Converter
LM35 Precision Centigrade Temperature Sensor
LM350 3-Amp Adjustable Regulator
LM350-N 3-Amp Adjustable Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM3565 www.ti.com SNVS957 – JANUARY 2013 4MHz, High-Current Flash LED Driver Check for Samples: LM3565 FEATURES 1 • High Efficiency Synchronous Boost Converter • Drives 2 LEDs in Series with up to 930 mA • External Strobe Pin for Hardware Enabled Flash • External Torch Pin for Hardware Enabled Torch • Dedicated Transmit Interrupt Pin • 8-Bit ADC for LED Voltage and Input Voltage Monitoring • Automatic Diode Current Scale Back • PWM Control in Flash and Assist Modes • Fault Detection and Reporting • 400 kHz I2C-Compatible Interface • 16-Bump, 1.990 mm x 1.990 mm x 0.6 mm DSBGA Package (YZR0016AAA) APPLICATIONS • Camera Phone LED Flash DESCRIPTION The LM3565 is a 4 MHz fixed-frequency, current mode synchronous boost converter designed to drive two series flash LEDs at 930 mA.
Published: |