Datasheet4U Logo Datasheet4U.com

ISO1042 - CAN Transceiver

Description

The ISO1042 device is a galvanically-isolated controller area network (CAN) transceiver that meets the specifications of the ISO11898-2 (2016) standard.

The ISO1042 device offers ±70-V DC bus fault protection and ±30-V common-mode voltage range.

Features

  • 1 Meets the ISO 11898-2:2016 physical layer standard.
  • Supports classic CAN up to 1 Mbps and FD (Flexible Data Rate) up to 5 Mbps.
  • Low loop delay: 152 ns.
  • Protection features.
  • DC bus fault protection voltage: ±70 V.
  • HBM ESD tolerance on bus pins: ±16 kV.
  • Driver Dominant Time Out (TXD DTO).
  • Undervoltage protection on VCC1 and VCC2.
  • Common-Mode Voltage Range: ±30 V.
  • Ideal passive, high impedance bus terminals.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISO100 Optically-Coupled Linear ISOLATION AMPLIFIER Burr-Brown Corporation
ISO1002 Small Signal Amplifier YUAN
ISO1003-xx-x Two Wires 4-20mA Isolated Signal Transmitter YUAN
ISO102 SIGNAL ISOLATION BUFFER AMPLIFIERS Burr-Brown Corporation
ISO103 Low-Cost/ Internally Powered ISOLATION AMPLIFIER Burr-Brown Corporation

Other Datasheets by Texas Instruments

Part Number Description
ISO1042-Q1 Automotive Isolated CAN Transceiver
ISO1044 Isolated CAN FD Transceiver
ISO1050 CAN Transceiver
ISO1176 RS-485 Profibus Transceiver
ISO1176T Profibus RS-485 Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community ISO1042 SLLSF09E – DECEMBER 2017 – REVISED JANUARY 2020 ISO1042 Isolated CAN Transceiver With 70-V Bus Fault Protection and Flexible Data Rate 1 Features •1 Meets the ISO 11898-2:2016 physical layer standard • Supports classic CAN up to 1 Mbps and FD (Flexible Data Rate) up to 5 Mbps • Low loop delay: 152 ns • Protection features – DC bus fault protection voltage: ±70 V – HBM ESD tolerance on bus pins: ±16 kV – Driver Dominant Time Out (TXD DTO) – Undervoltage protection on VCC1 and VCC2 • Common-Mode Voltage Range: ±30 V • Ideal passive, high impedance bus terminals when unpowered • High CMTI: 100 kV/µs • VCC1 voltage range: 1.71 V to 5.5 V – Supports 1.8-V, 2.5-V, 3.3-V and 5.
Published: |