Datasheet4U Logo Datasheet4U.com

AS1383 - DC-DC Step-Up Converter

Description

The AS1383 is a synchronous, high efficiency DC-DC boost converter running at a constant frequency of 3.5MHz.

This very high oscillator frequency allows the usage of a low profile inductor with only 1μH.

Features

  • a power save mode for light loads. To avoid harmful deep discharge of the battery during shutdown the AS1383 is equipped with an output disconnect function. The AS1383 is available in a 6-pin WL-CSP package with 0.4mm pitch. Ordering Information and Content Guide appear at end of datasheet. Figure 1: Added Value of Using AS1383 Key Benefits & Features The benefits and features of AS1383 are listed below: Benefits Features Ideal for single Li-Ion battery powered.

📥 Download Datasheet

Datasheet Details

Part number AS1383
Manufacturer ams OSRAM
File Size 0.98 MB
Description DC-DC Step-Up Converter
Datasheet download datasheet AS1383 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AS1380 AC-DC PWM ASI
AS130-73 GaAs SPST High-Isolation Switch 300 kHz-2.5 GHz Skyworks Solutions
AS130-73LF GaAs SPST High-Isolation Switch 300 kHz-2.5 GHz Skyworks Solutions
AS1301 800mA Synchronous Step-Down Converter ANISEM
AS1301 5V/50mA Low Noise Inductorless Boost Converter austriamicrosystems AG

Other Datasheets by ams OSRAM

Part Number Description
AS1382 DC-DC Step Down Converter
AS1310 Hysteretic DC-DC Step-Up Converter
AS1312 Hysteretic DC-DC Step-up Converter
AS1322 DC-DC Step-Up Converters
AS1323 DC-DC Step-up Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AS1383 200mA, 3.5MHz DC-DC Step-Up Converter General Description The AS1383 is a synchronous, high efficiency DC-DC boost converter running at a constant frequency of 3.5MHz. This very high oscillator frequency allows the usage of a low profile inductor with only 1μH. This results in a very small board space requirement for the complete solutions including all external components. AS1383 generates an output voltage range from 2.7V to 5.0V. In adjustable output voltage variant, the output voltage is selected with an external resistor divider. In fixed output voltage variant the VOUT is pre-programmed in 100mV steps, and the external resistor divider is not needed. AS1383 supports input voltages down to 2.7V. The device provides an output current of 200mA.