UZ2400 Datasheet (Uniband Electronic) - Low Power 2.4 GHz Transceiver

UZ2400, Low Power 2.4 GHz Transceiver

Pin type abbreviation: A = Analog, D = Digital, I = Input, O = Output, P = Power, G = Ground Pin Number Pin Name Type Description 1 GPIO0 DIO General purpose digital I/O, also used as an external PA enable 2 NC No connection 3 NC No connection 4 NC No connection 5 NC No connection 6

UZ2400 Silicon Version D UZ2400 Silicon Version D Low Power 2.4 GHz Transceiver for IEEE 802.15.4 Standard U-Power1000D Module AN-2400-64 The content of this technical document is subject to change without notice.

Please contact UBEC for further information.

Version: 0.0 Released Date:2009/10/26 All rights are strictly reserved.

Any portion of this document shall not be reproduced, copied, or transformed to any other forms without prior permission from Uniband Electronic Corp.

AN-240

UZ2400 Features

* 2.4GHz IEEE 802.15.4 compliant 3.0 ~ 3.6V Operation Effective Distance: 1000 meters (line of sight, environment dependent, typical) SMA Connector Additional 2 GSG (ground-signal-ground) Interfaces Provided RX Sensitivity: -100dBm, typical TX Output Power: 18dBm, typical TX Current Co