Datasheet4U Logo Datasheet4U.com

U74AHC541 - OCTAL BUFFERS/DRIVERS

Description

The U74AHC541 is a octal buffers/drivers with 3-state outputs and 8 channels.

The 3-state control gate is a two-input AND gate with active-low inputs so that if either output-enable ( OE1 or OE2 ) input is high, all corresponding outputs are in the high-impedance state.

Features

  • S.
  • Operate from 2V to 5.5V.
  • Balanced propagation delays.
  • Inputs accepts voltages higher than VCC.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
U74AHC573 OCTAL TRANSPARENT D-TYPE LATCHES Unisonic Technologies
U74AHC574 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS Unisonic Technologies
U74AHC595 8-BIT SHIFT REGISTER Unisonic Technologies
U74AHC00 QUADRUPLE 2-INPUT POSITIVE-NAND GATES Unisonic Technologies
U74AHC02 2-INPUT NOR GATE Unisonic Technologies

Other Datasheets by Unisonic Technologies

Part Number Description
U74AHC595B 8-BIT SHIFT REGISTER
U74AHC132 QUADRUPLE POSITIVE-NAND GATES
U74AHC1G00 2-INPUT NAND GATE
U74AHC1G08 2-INPUT AND GATE
U74AHC1G66 BILATERAL SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD U74AHC541 OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS  DESCRIPTION The U74AHC541 is a octal buffers/drivers with 3-state outputs and 8 channels. The 3-state control gate is a two-input AND gate with active-low inputs so that if either output-enable ( OE1 or OE2 ) input is high, all corresponding outputs are in the high-impedance state. The outputs provide noninverted data when they are not in the high-impedance state. To ensure the high-impedance sate during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.  FEATURES * Operate from 2V to 5.
Published: |