Datasheet4U Logo Datasheet4U.com

LB8102 - DISEqC SWITCH IC

Description

The integrated circuit UTC LB8102 DiSEqC switch IC is specially designed for satellite multi-switch It receives and decodes DiSEqC command, Tone Burst and output control for signal switch.

The UTC LB8102 DiSEqC switch IC provides four-switch control.

Features

  • S.
  • Single supply voltage 3.9V~5V.
  • Support DiSEqC 1.0/ 1.1 and Tone Burst commend.
  • Selectable 4x1 and 2x1.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LB8106M Actuator Driver Sanyo
LB8107M Portable CD Player Actuator Driver Sanyo
LB8108M Actuator Driver Sanyo
LB8109M Actuator Driver Sanyo
LB8111V 8mm VTR Sensor Amplifier Sanyo

Other Datasheets by Unisonic Technologies

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD LB8102 Preliminary DISEqC SWITCH IC  DESCRIPTION The integrated circuit UTC LB8102 DiSEqC switch IC is specially designed for satellite multi-switch It receives and decodes DiSEqC command, Tone Burst and output control for signal switch. The UTC LB8102 DiSEqC switch IC provides four-switch control. A 22KHz DiSEqC control signal input to UTC LB8102 DiSEqC IC can select one of four switches. This feature is used as Satellite Position/Option Switch Control usually in LNB application. The built in decode process is fully compatible with DiSEqC protocol about committed switch.  FEATURES * Single supply voltage 3.9V~5V. * Support DiSEqC 1.0/ 1.1 and Tone Burst commend * Selectable 4x1 and 2x1 application. * Drives up to four switches.
Published: |