Datasheet4U Logo Datasheet4U.com

TB6561NG - Dual Full-Bridge Driver

Description

Pin No.

IN2A VCC OUT1A N.C.

P-GNDA OUT2A S-GND S-GND OUT2B P-GNDB N.C.

Features

  • Power supply voltage: 40 V (max).
  • Output current: 1.5 A (max).
  • Low ON-resistance: 1.5 Ω (upper and lower transistors/typ. ).
  • Direct PWM current control system.
  • Power-saving function.
  • Forward/reverse/short brake/stop modes.
  • Over-current protection: ILIM = 2.5 A (typ. ).
  • Thermal shutdown.
  • Package: SDIP-24-Ｐ-300-1.78 Weight: 1.62 g (typ. ) The following conditions apply to solderability: About solderability, following.

📥 Download Datasheet

Datasheet Details

Part number TB6561NG
Manufacturer Toshiba
File Size 252.79 KB
Description Dual Full-Bridge Driver
Datasheet download datasheet TB6561NG Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TB6560-3N the Stepper Motor Driver Board User Manual ETC
TB6560FG PWM Chopper-Type bipolar Stepping Motor Driver Toshiba Semiconductor
TB6560HQ PWM Chopper-Type bipolar Stepping Motor Driver Toshiba Semiconductor
TB6562ANG Dual Full-Bridge Driver Toshiba Semiconductor
TB6568KQ Full-Bridge DC Motor Driver Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TB6561FG Dual Full-Bridge Driver IC
TB6560AFG PWM Chopper-Type Bipolar Driver
TB6560AFTG PWM Chopper-Type Bipolar Driver IC
TB6560AHQ PWM Chopper-Type Bipolar Driver
TB6562AFG Dual Full-Bridge Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB6561NG Dual Full-Bridge Driver IC for DC Motors TB6561NG The TB6561NG is a dual bridge driver IC for DC brush motor that contains MOS transistors in an output stage. By using low ON-resistance MOS transistors and PWM current control circuitry, the driver achieves high efficiency. Features • Power supply voltage: 40 V (max) • Output current: 1.5 A (max) • Low ON-resistance: 1.5 Ω (upper and lower transistors/typ.) • Direct PWM current control system • Power-saving function • Forward/reverse/short brake/stop modes • Over-current protection: ILIM = 2.5 A (typ.) • Thermal shutdown • Package: SDIP-24-Ｐ-300-1.78 Weight: 1.62 g (typ.