Datasheet4U Logo Datasheet4U.com

TA2009F - Filter

Download the TA2009F datasheet PDF. This datasheet also covers the TA2009 variant, as both devices belong to the same filter family and are provided as variant models within a single manufacturer datasheet.

Description

Pin No.

R channel operational amplifier forward input terminal.

Connect to VRI.

Ground terminal.

3 RO O R channel analog output terminal.

Reference voltage terminal.

Non-co

Features

  • Built.
  • in CR for LPFs and output (differential) amplifiers for the left and right channel.
  • Single power supply operation.
  • Noise distortion factor and S / N ratio are as follows (when operating at +5V single power supply): Noise distortion factor:.
  • 93dB (typ. ) S / N: 100dB (typ. ) Pin Connection (top view) Weight SSOP16.
  • P.
  • 225.
  • 1.00A: 0.14g (typ. ) DIP16.
  • P.
  • 300.
  • 2.54A: 1.00g (typ. ) 1 2002-10-30 Block Diagram TA2009F/P.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TA2009_Toshiba.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
TA2000 TA2000 ETC
TA2003 AM/FM RADIO-IC UTC
TA2003FG AM / FM Radio-IC Toshiba Semiconductor
TA2003PG AM / FM Radio-IC Toshiba Semiconductor
TA2008ANG 5V AM / FM 1-Chip Tuner Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TA2009P Filter
TA2002F Stereo Headphone Amplifier
TA2002FN Stereo Headphone Amplifier
TA2003F AM/FM RADIO-IC
TA2003P AM/FM RADIO-IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA2009F,TA2009P Filter IC For Σ−∆ Modulation System DA Converter TA2009F/P TA2009F, TA2009P are an analog filter IC for Σ−∆ modulation system DA converter. Using the TA2009F, TA2009P in combination the TC9237BF, TC9237BN (the Σ−∆ modulation system DA converter with a built−in digital filter), it is possible to construct a DA conversion system with less external parts. Features · Built−in CR for LPFs and output (differential) amplifiers for the left and right channel. · Single power supply operation. · Noise distortion factor and S / N ratio are as follows (when operating at +5V single power supply): Noise distortion factor: −93dB (typ.) S / N: 100dB (typ.) Pin Connection (top view) Weight SSOP16−P−225−1.00A: 0.14g (typ.
Published: |