Datasheet4U Logo Datasheet4U.com

XC9259 - 1.0A Synchronous Step-Down DC/DC Converters

Description

and N-channel MOS switching transistor, designed to allow the use of ceramic capacitors.

Features

  • Voltage Range Output Voltage Range Oscillation Frequency Output Current Control Methods.
  • Digital still cameras, Camcorders.
  • Point-of-Load (POL) Protection Circuits.
  • Wearable devices Functions Capacitor Operating Ambient Temperature Package Environmentally Friendly : 2.5V～5.5V : 0.8V～3.6V (±2.0%) : 1.2MHz, 6.0MHz : 1A : HiSAT-COT Control 100% Duty Cycle PWM Control PWM/PFM Auto : Thermal Shutdown Current Limit (Pendent character) Short Circuit Protection (Type B) : Soft-Start.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XC9242 2A Synchronous Step-Down DC/DC Converter Torex
XC9243 2A Synchronous Step-Down DC/DC Converter Torex
XC9244 Step-Down DC/DC Converter Torex
XC9245 Step-Down DC/DC Converter Torex
XC9260 Step-Down DC/DC Converter Torex

Other Datasheets by Torex Semiconductor

Part Number Description
XC9250 30V Driver Transistor Built-In Step-Down DC/DC Converters
XC9251 30V Driver Transistor Built-In Step-Down DC/DC Converters
XC9252 Low Power Consumption Step-down DC/DC Controller
XC9253R Synchronous Step-Down DC/DC Converter
XC9254R Synchronous Step-Down DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XC9259 Series is Not Recommended for New Designs. XC9259 Series ETR05041-003 COT Control, 1.0A Synchronous Step-Down DC/DC Converters ■GENERAL DESCRIPTION ☆GreenOperation-compatible The XC9259 series is a group of synchronous-rectification type DC/DC converters with a built-in P-channel MOS driver transistor and N-channel MOS switching transistor, designed to allow the use of ceramic capacitors. Output voltage is internally set in a range from 0.8V to 3.6V (accuracy: ±2.0%) increments of 0.05V. The device provides a high efficiency, stable power supply with an output current of 1.0A to be configured using only a coil and two capacitors connected externally. Oscillation frequency is set to 1.2MHz or 6.0MHz can be selected for suiting to your particular application.
Published: |