Datasheet4U Logo Datasheet4U.com

OPL800 - Photologic Hermetic Sensor

Description

All OPL800, OPL801 and OPL820 sensors consist of a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip (monolithic chip for OPL820).

OPL810, OPL811 and OPL813 sensors also have a voltage regulator added to their photologic chips.

Features

  • Four output options available.
  • High noise immunity.
  • Direct TTL/LSTTL interface.
  • TO-18 hermetically sealed package.
  • Sensors mechanically and spectrally matched to other Optek devices (see device.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OPL110 OPTICALLY COUPLED ISOLATORS ETC
OPL1264A (OPL1264 / OPL1265) Optocouplers Three-Five Systems
OPL1264B (OPL1264 / OPL1265) Optocouplers Three-Five Systems
OPL1264C (OPL1264 / OPL1265) Optocouplers Three-Five Systems
OPL1265A (OPL1264 / OPL1265) Optocouplers Three-Five Systems

Other Datasheets by TT Electronics

Part Number Description
OPL800-OC Photologic Hermetic Sensor
OPL800TXV Hermetic Sensors
OPL801 Photologic Hermetic Sensor
OPL801-OC Photologic Hermetic Sensor
OPL810 Photologic Hermetic Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Photologic Hermetic Sensors OPL800, OPL800-OC, OPL801, OPL801-OC, OPL810, OPL811, OPL811-OC, OPL813-OC, OPL820, OPL820-OC Obsolete (OPL810-OC, OPL812-OC, OPL821-OC) Features: • Four output options available • High noise immunity • Direct TTL/LSTTL interface • TO-18 hermetically sealed package • Sensors mechanically and spectrally matched to other Optek devices (see device descriptions detailed below) Description: All OPL800, OPL801 and OPL820 sensors consist of a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip (monolithic chip for OPL820). OPL810, OPL811 and OPL813 sensors also have a voltage regulator added to their photologic chips. Each device’s photologic chip is mounted onto a standard TO-18 header and hermetically sealed in a lensed metal can.
Published: |