Datasheet4U Logo Datasheet4U.com

GS1674 - Adaptive Cable Equalizer

Description

3 2.

Electrical Characteristics 5 2.1 Absolute Maximum Ratings 5 2.2 DC Electrical Characteristics 5 2.3 AC Electrical Characteristics 6 2.4 Typical Performance Curves 7 3.

Features

  • DC restoration to compensate for the DC content of SMPTE pathological test patterns. The Carrier Detect output pin (CD) indicates whether a valid input signal has been detected. It can be connected directly to the MUTE pin to mute the output on loss of carrier. The sensitivity of the carrier detect can be easily programmed to allow the GS1674 to distinguish between low-amplitude SDI signals and noise at the input of the device. The equalizing and DC restore stages are disengaged when the BYPASS.

📥 Download Datasheet

Datasheet preview – GS1674

Datasheet Details

Part number GS1674
Manufacturer SEMTECH
File Size 495.52 KB
Description Adaptive Cable Equalizer
Datasheet download datasheet GS1674 Datasheet
Additional preview pages of the GS1674 datasheet.

📁 Similar Datasheet

  • GS1672 - HD/SD-SDI Serializer (GENNUM)
  • GS1675 - SD/HD SDI Reclocker (GENNUM)
  • GS1679 - Cable Driver (Gennum)
  • GS1662 - HD/SD-SDI Serializer (GENNUM)
  • GS10000FL - 1.0A Surface Mount Glass Passivated Standard Diode (SINLOON)
  • GS1000FL - SURFACE GENERAL PURPOSE RECTIFIERS (Pan Jit International)
  • GS1000FL - 1.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODE (WON-TOP ELECTRONICS)
  • GS1000FL - SURFACE MOUNT RECTIFIER (UPM)
  • GS1000FL - 1.0A General Purpose Rectifier (DIOFIT)
  • GS1000FL - SURFACE MOUNT RECTIFIER DIODES (SunMate)
Other Datasheets by Semtech

Full PDF Text Transcription

Click to expand full text
GS1674 GS1674 Adaptive Cable Equalizer The GS1674 is a high-speed BiCMOS integrated circuit designed to equalize and restore signals received over 75Ω coaxial cable. The device is optimized for performance at 270Mb/s and 1.485Gb/s, and features DC restoration to compensate for the DC content of SMPTE pathological test patterns. The Carrier Detect output pin (CD) indicates whether a valid input signal has been detected. It can be connected directly to the MUTE pin to mute the output on loss of carrier. The sensitivity of the carrier detect can be easily programmed to allow the GS1674 to distinguish between low-amplitude SDI signals and noise at the input of the device. The equalizing and DC restore stages are disengaged when the BYPASS pin is HIGH. No equalization occurs in Bypass mode.
Published: |