LB1934T - 3V Camera 1.5-Channel Driver

Sanyo

Datasheet Details

Low voltage drive possible. When using same power supply for V CC and V S : VCC=VS=1.4V min. When using separate power supply for VCC and VS : VS=1.0V min. , VCC=1.4V min.
Low saturation voltage : residual voltage (upper side transistor + lower side transistor) =0.5V typ. at Io=1A.
Zero power dissipation in standby mode.
Direct microcontroller drive possible (any strength relationships of voltage supported between microcontroller control signal and VCC or V.

📁 LB1934T Similar Datasheet

LB1930MC - Bidirectional Motor Driver (ON Semiconductor)
LB1933M - Low-saturation Forward/Reverse Motor Drive (Sanyo Semicon Device)
LB1935CL - Monolithic Digital IC Stepping Motor Driver IC (Sanyo Semicon Device)
LB1935FA - Stepping Motor Driver (ON Semiconductor)
LB1935T - Monolithic Digital IC Stepping Motor Driver IC (Sanyo Semicon Device)
LB1937T - 1-2 Phase Excitation Stepping Motor Driver (Sanyo Semicon Device)
LB1938FA - Low-saturation Forward/Reverse Motor Driver (ON Semiconductor)
LB1939T - 2 Channel H Bridge Constant Voltage/ Constant Current Driver IC (Sanyo Semicon Device)

Other Datasheets by Sanyo

LB1934 - 3V Camera 1.5-Channel Driver
LB1930 - Single-Channel Low Saturation Voltage Forward/Reverse Motor Driver
LB1930M - Single-Channel Low Saturation Voltage Forward/Reverse Motor Driver
LB1936V - Stepping motor driver
LB1938T - I CH MOTOR DRIVE
LB1909MC - Stepping Motor Driver IC

Published: Apr 25, 2005 |