Datasheet4U Logo Datasheet4U.com

LV8740V - PWM Current Control Stepping Motor Driver

Features

  • Single-channel PWM current control stepping motor driver (selectable with DC motor driver channel 2) incorporated.
  • On resistance (upper side : 0.3Ω ; lower side : 0.2Ω ; total of upper and lower : 0.5Ω ; Ta = 25°C, IO = 2.5A).
  • Excitation mode can be set to 2-phase, 1-2 phase full torque, 1-2 phase or W1-2 phase.
  • Excitation step proceeds only by step signal input.
  • Motor holding current selectable in four steps.
  • BiCDMOS process IC.
  • O.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LV8741V PWM Current Control Stepper Motor Driver ON Semiconductor
LV8746V Stepper Motor Driver ON Semiconductor
LV8747TA PWM Constant-Current Control Stepping Motor Driver and Switching Regulator Controller ON Semiconductor
LV8702V PWM Current Control High-efficient Stepper Motor Driver ON Semiconductor
LV8711T PWM Constant-Current Control Stepping Motor Driver ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LV8741V PWM Current Control Stepping Motor Driver
LV8743V PWM Constant-Current Control Stepping Motor Driver and Switching Regulator Controller
LV8746V PWM Current Control Stepping Motor Driver
LV8747T PWM Constant-Current Control Stepping Motor Driver and Switching Regulator Controller
LV8711T PWM Constant-Current Control Stepping Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr Ordering number : ENA1864 Bi-CMOS LSI LV8740V Overview PWM Current Control Stepping Motor Driver The LV8740V is a 2-channel H-bridge driver IC that can switch a stepping motor driver, which is capable of micro-step drive and supports W 1-2 phase excitation, and two channels of a brushed motor driver, which supports forward, reverse, brake, and standby of a motor. It is ideally suited for driving brushed DC motors and stepping motors used in office equipment and amusement applications. Features • Single-channel PWM current control stepping motor driver (selectable with DC motor driver channel 2) incorporated. • On resistance (upper side : 0.3Ω ; lower side : 0.2Ω ; total of upper and lower : 0.5Ω ; Ta = 25°C, IO = 2.
Published: |