Datasheet4U Logo Datasheet4U.com

LV5813TT - Step-down Switching Regulator

Description

2 VIN Input voltage pin.

Connect substantially large (10μF 2 parameters or more) capacitance between this pin and GND.

3 SW Power switch pin.

Features

  • low-threshold voltage, Venl -- V 2.6 Venl -- Ta VIN = 12V EN high-thres.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LV58063MC Step-down Switching Regulator ON Semiconductor
LV5011MD LED Driver IC ON Semiconductor
LV5012MD LED Driver IC ON Semiconductor
LV5012MD-AH LED Driver IC ON Semiconductor
LV5044V DC-DC Converter Controller ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LV58132MX Step-down Switching Regulator
LV5810M Step-down Switching Regulator
LV5818M Step-down Switching Regulator
LV5803M Bi-CMOS IC Step-down Switching Regulator
LV58061MX Step-down Switching Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr Ordering number : ENA1761A LV5813TT Overview Bi-CMOS IC Step-down Switching Regulator LV5813TT is 1ch step down switching regulator. 0.25Ω FET is incorporated on the upper side to achieve high-efficiency operation for large output current. Compact-package MSOP8 (150mil) employed. Current mode control type, with superior load current response and easy phase compensation. ON/OFF pin, allowing the standby mode with the current drain of 90μA or less. Pulse-by-pulse over-current protection and overheat protection available for protection of load devices. Soft start pin to be provided with a capacitance for soft start. Functions • 1.5A 1ch step-down switching regulator • Wide input dynamic range (4.
Published: |