LE24CBK22 Datasheet (Sanyo Semicon Device) - Two Wire Serial Interface EEPROM

LE24CBK22, Two Wire Serial Interface EEPROM

PIN.1 PIN.2 SCL2 SDA2 COBM GND SDA1 SCL1 WP VDD Serial clock input Serial data input/output (For Bank2) SCL2 SDA2 COBM GND 1 2 3 4 8 7 6 5 VDD WP SCL1 SDA1 PIN.3 PIN.4 PIN.5 PIN.6 PIN.7 PIN.8 0.08 Bank/combine mode switching Ground Serial data input/output Serial clock input Write protect Po

www.DataSheet.co.kr Ordering number : EN A1514A LE24CBK22 Overview CMOS IC Two Wire Serial Interface EEPROM (2K+2K EEPROM) The dual port EEPROM series consists of two independent banks, and each bank can be controlled separately using dedicated control pins.

The two banks can each be controlled separately, but share the internal power supply system.

In addition, this product uses a 2-wire serial interface, and is the optimal device for realizing substantial reductions in system cost and

LE24CBK22 Features

* es of the SCL1 clock signal. This pin must be pulled up by a resistor to the VDD level, and wired-ORe