Datasheet4U Logo Datasheet4U.com

KB8825 - 1.1GHZ DUAL PLL

Description

Pin No.

O

O I I I O O I O 0 I Description Input terminal of channel 1 RF signal.

Power supply voltage input.

PIN2 and PIN15 are connected together.

Features

  • Two systems for receiver and transmitter Very low operating current consumption: Icc = Typ. 5.5mA @ 3.0V Low operating power supply voltage : 2.2 ~ 5.5V ( 200MHz ~ 550MHz Operating ) 2.7 ~ 3.6V ( 550MHz ~ 1.1GHz Operating ).
  • Modulus pre-scaler: 64 / 66 No dead-zone PFD Colpitt type local oscillation Selectable charge pump current Selectable power down mode TSSOP 16-pin package (0.65 mm pitch).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
KB814 GENERAL PURPOSE HIGH ISOLATION VOLTAGE SINGLE TRANSISTOR TYPE PHOTOCOUPLER SERIES Kingbright Corporation
KB817 High Isolation Voltage Photocoupler Kingbright Electronic
KB817-B High Isolation Voltage Photocoupler Kingbright Electronic
KB844 PHOTOCOUPLER Kingbright Corporation
KB845 PHOTOCOUPLER Kingbright Corporation

Other Datasheets by Samsung Semiconductor

Part Number Description
KB8821 FREQUENCY SYNTHESIZER
KB8822 FREQUENCY SYNTHESIZER
KB8823 FREQUENCY SYNTHESIZER
KB8527 1 CHIP CLP SUBSYSTEM IC
KB8527B 1 CHIP CLP SUBSYSTEM IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Final version ( 99.4.30 ) 1.1GHZ DUAL PLL KB8825 INTRODUCTION The KB8825 is a high performance dual frequency synthesizer with two integrated high frequency pre-scalers for RF operation up to 1.1 GHz. The KB8825 is composed of modulus pre-scalers providing 64 and 66, no dead-zone PFD, selectable charge pump current, selectable power down mode circuits, lock detector output, and loop filter’s time constant switch. It is fabricated using the ASP5HB Bi-CMOS process and is available 16-TSSOP with surface mount plastic packaging. Serial data is transferred into the KB8825 via three-wire interface (CK, DATA, EN). 16−TSSOP−0044 FEATURES • • • Two systems for receiver and transmitter Very low operating current consumption: Icc = Typ. 5.5mA @ 3.0V Low operating power supply voltage : 2.2 ~ 5.
Published: |