Datasheet4U Logo Datasheet4U.com

ST485A - Very high speed low power RS-485/RS-422 transceiver

Description

The ST485A is a low power, high speed transceiver for RS-485 and RS-422 communications.

The device contains one driver and one receiver in half duplex configuration.

The ST485A draws 3mA (typ.) of supply current when unloaded or fully loaded with disabled drivers.

Features

  • s s s s s Low supply current: 5mA max High data rate > 30Mbps Designed for RS 485 interface.

📥 Download Datasheet

Datasheet preview – ST485A

Datasheet Details

Part number ST485A
Manufacturer STMicroelectronics
File Size 274.21 KB
Description Very high speed low power RS-485/RS-422 transceiver
Datasheet download datasheet ST485A Datasheet
Additional preview pages of the ST485A datasheet.

📁 Similar Datasheet

  • ST485 - Low power RS-485/RS-422 transceiver (ST Microelectronics)
  • ST485E - LOW POWER RS-485/RS-422 TRANSCEIVER (ST Microelectronics)
  • ST485EBDR - Slew-Rate-Limited RS-485/RS-422 Transceivers (UMW)
  • ST480M - Integrated 3-axis Magnetometer (SENODIA)
  • ST4828N - Dual N Channel Enhancement Mode MOSFET (Stanson)
  • ST486DX - PROGRAMMING MANUAL (ST Microelectronics)
  • ST486DX - ST 486 DX ASIC CORE (ST Microelectronics)
  • ST48D50 - DC Control Solid-State Relays (Teledyne)
  • ST4045C - SCHOTTKY RECTIFIER (SMC Diode)
  • ST4130A - Crystal Clock Oscillator (SaRonix)
Other Datasheets by STMicroelectronics
  • ST485B - Low power RS-485/RS-422 transceiver
  • ST485C - Low power RS-485/RS-422 transceiver
  • ST485EB - RS-485/RS-422 transceiver
  • ST485EC - RS-485/RS-422 transceiver
  • ST485ER - Low power RS-485/RS-422 transceiver
  • ST485EX - RS-485/RS-422 transceiver
  • ST40RA - 32-bit Embedded SuperH Device
  • ST4485EB - RS-485/RS-422 transceiver

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com ST485A Very high speed low power RS-485/RS-422 transceiver General features s s s s s Low supply current: 5mA max High data rate > 30Mbps Designed for RS 485 interface applications -7 to 12 common mode input voltage range Driver maintains high impedance in 3-state or with the power off 70mV typical input hysteresis Operate from single 5 supply ±4kV ESD protection Current limiting and thermal shutdown for driver overload protection Latch-up free up to 500mA Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that place the driver outputs into a high-impedance state. The receiver input has a fail-safe feature that guarantees a logic high output if both inputs are open circuit.
Published: |