Datasheet4U Logo Datasheet4U.com

SGM836 - Microprocessor Supervisory

Description

The SGM836 family can monitor system voltages from 0.4V to 5V.

When the detection voltage falls below the preset threshold (VITL) or the manual reset (nMR) pin is driven low, the open-drain nRESET output is asserted.

Features

  • Adjustable Reset Timeout Period: 1.25ms to 10s.
  • Low Quiescent Current: 0.6μA (TYP).
  • High Threshold Accuracy: 1% (TYP).
  • Factory-Set Detection Voltages: 0.9V to 5V.
  • Adjustable Detection Voltage Down to 0.4V.
  • Manual Reset (nMR) Input.
  • Open-Drain nRESET Output.
  • Available in Green SOT-23-6 and TDFN-2×2-6AL Packages.

📥 Download Datasheet

Datasheet Details

Part number SGM836
Manufacturer SG Micro
File Size 892.81 KB
Description Microprocessor Supervisory
Datasheet download datasheet SGM836 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SGM800 SOT uP Reset Shengbang Microelectronics
SGM8000C MLC eMMC SiliconGo
SGM802 low-power micro-processor supervisor Shengbang Microelectronics
SGM803 Microprocessor Supervisory Shengbang Microelectronics
SGM804 low-power micro-processor supervisor Shengbang Microelectronics

Other Datasheets by SG Micro

Part Number Description
SGM836-1.8Q Microprocessor Supervisory
SGM836-3.3Q Microprocessor Supervisory
SGM836-ADJQ Microprocessor Supervisory
SGM8301 Rail-to-Rail Output Amplifiers
SGM8302 Rail-to-Rail Output Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SGM836 Microprocessor Supervisory Circuit with Programmable Delay Time GENERAL DESCRIPTION The SGM836 family can monitor system voltages from 0.4V to 5V. When the detection voltage falls below the preset threshold (VITL) or the manual reset (nMR) pin is driven low, the open-drain nRESET output is asserted. After the detection voltage and nMR voltage return higher than their respective thresholds, the nRESET output remains low within the user-adjustable delay time. The SGM836 uses a precision reference to achieve 1% threshold accuracy. The fixed reset timeout period can be set to 20ms by leaving the CT pin open and can be set to 300ms by connecting the CT pin to VDD through a resistor. The programmable reset timeout period can be set from 1.
Published: |