Datasheet4U Logo Datasheet4U.com

SGM6607A - 1.2A High Voltage Boost Converter

Description

The SGM6607A is a high voltage switching regulator.

It integrates a 40V low-side MOSFET to offer an output voltage up to 38V.

It also accepts a wide input voltage range of 3V to 20V from multi-cell batteries or regulated 5V/12V power rails.

Features

  • Input Voltage Range: 3V to 20V.
  • Up to 38V High Output Voltage.
  • 1.2A Integrated Switch.
  • 1.1MHz Fixed Switching Frequency.
  • At 5V Input (TYP): 12V at 300mA 24V at 150mA.
  • Up to 93% Efficiency.
  • Skip-Switching for Light Load.
  • 500kΩ Pull-Down Resistor on EN Pin.
  • Soft-Start and Thermal Shutdown Built-in Functions.
  • -40℃ to +85℃ Operating Temperature Range.
  • Available in Green TDFN-2×2-6AL and TSOT-23-6 Packages.

📥 Download Datasheet

Datasheet Details

Part number SGM6607A
Manufacturer SG Micro
File Size 0.95 MB
Description 1.2A High Voltage Boost Converter
Datasheet download datasheet SGM6607A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SGM-2-17 DOUBLE-BALANCED MIXER DOUBLE-BALANCED MIXER Synergy
SGM031R7T 150A N-CHANNEL POWER MOSFET HI-SEMICON
SGM0410 N-Channel Enhancement Mode Power MOSFET SeCoS
SGM0410-C N-Channel Enhancement Mode Power MOSFET SeCoS
SGM0410S N-Channel Enhancement Mode Power MOSFET SeCoS

Other Datasheets by SG Micro

Part Number Description
SGM6607 High Voltage Boost Converter
SGM660 Buck-Boost Converter
SGM6600 90% Efficient Synchronous Step-Up Converter
SGM6601 Low-Power DC-DC Step-Up Converter
SGM6603 90% Efficient Synchronous Step-Up Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SGM6607A 1.2A High Voltage Boost Converter in Small Packages GENERAL DESCRIPTION The SGM6607A is a high voltage switching regulator. It integrates a 40V low-side MOSFET to offer an output voltage up to 38V. It also accepts a wide input voltage range of 3V to 20V from multi-cell batteries or regulated 5V/12V power rails. A 1.1MHz switching frequency makes the use of low-profile inductors and low-value ceramic input and output capacitors available. The device supports Boost, SEPIC and some other standard switching-regulator topologies. The device regulates the output with PWM (pulse width modulation) control. This device also includes the built-in functions of over-current limit, soft-start and thermal shutdown.
Published: |