Datasheet4U Logo Datasheet4U.com

SGM42611 - Stepper Motor Driver

Download the SGM42611 datasheet PDF. This datasheet also covers the SGM42610 variant, as both devices belong to the same stepper motor driver family and are provided as variant models within a single manufacturer datasheet.

Description

The SGM42610/SGM42611 can drive solenoids, two DC motors, one DC motor in parallel connection, as well as a stepper motor in full-step or half-step.

The devices can operate over a wide input voltage range of 2.5V to 16V.

Two versions (SGM42611A and SGM42611B) of the SGM42611 are offered.

Features

  • SGM42610: Quad Half-Bridge Driver.
  • SGM42611A: 4-Wire Input Stepper Driver.
  • SGM42611B: 2-Wire Input Stepper Driver.
  • Supply Voltage Range: 2.5V to 16V.
  • Integrated Protection Features.
  • VCC Under-Voltage Lockout (UVLO).
  • Over-Current Protection (OCP).
  • Thermal Shutdown (TSD).
  • Short-Circuit Protection (SCP).
  • Auto-Retry.
  • Low Power Sleep Mode (SGM42611B Only).
  • Available in Green MSOP-10 (Exposed Pad) and SSOP-10 Packages.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (SGM42610-SGMicro.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
SGM4157 DPDT Analog Switch Shengbang Microelectronics
SGM44599 DPDT Analog Switch Shengbang Microelectronics
SGM44600 DPDT Analog Switch Shengbang Microelectronics
SGM44601 DPDT Analog Switch Shengbang Microelectronics
SGM44602 DPDT Analog Switch Shengbang Microelectronics

Other Datasheets by SG Micro

Part Number Description
SGM42610 Stepper Motor Driver
SGM42600 Dual H-Bridge Motor Driver
SGM42606 Single H-Bridge DC Motor Driver
SGM42609 Single H-Bridge Motor Driver
SGM42630 Stepper Motor Controller

Full PDF Text Transcription

Click to expand full text
SGM42610/SGM42611 Stepper Motor Driver ICs GENERAL DESCRIPTION The SGM42610/SGM42611 can drive solenoids, two DC motors, one DC motor in parallel connection, as well as a stepper motor in full-step or half-step. The devices can operate over a wide input voltage range of 2.5V to 16V. Two versions (SGM42611A and SGM42611B) of the SGM42611 are offered. The SGM42611B has low power sleep mode which is provided to save power dissipation. If the EN pin is pulled low, the SGM42611B will enter into sleep mode after tSLEEP. The SGM42610 and SGM42611 are available in Green MSOP-10 (Exposed Pad) and SSOP-10 packages. FEATURES ● SGM42610: Quad Half-Bridge Driver ● SGM42611A: 4-Wire Input Stepper Driver ● SGM42611B: 2-Wire Input Stepper Driver ● Supply Voltage Range: 2.
Published: |