X9241A Datasheet - Renesas

X9241A Quad Digital Potentionmeter

Host Interface Pins Serial Clock (SCL) The SCL input is used to clock data into and out of the X9241A. Serial Data (SDA) SDA is a bidirectional pin used to transfer data into and out of the device. It is an open drain output and m.

DATASHEET X9241A Quad Digital Controlled Potentionmeters (XDCP™) Non-Volatile/Low Power/2-Wire/64 Taps FN8164 Rev 7.00 August 17, 2015 The X9241A integrates four digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated microcircuit. The digitally controlled potentiometer is implemented using 63 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the.

X9241A Features

* Four potentiometers in one package

* 2-wire serial interface

* Register oriented format - Direct read/write/transfer of wiper positions - Store as many as four positions per potentiometer

* Terminal Voltages: +5V, -3.0V

* Cascade resistor arrays

* Lo

X9241A Datasheet (716.43 KB)