X9015 Datasheet (Renesas) - Single Digitally Potentiometer

X9015, Single Digitally Potentiometer

RH/VH and RL/VL The high (RH/VH) and low (RL/VL) terminals of the X9015 are equivalent to the fixed terminals of a mechanical potentiometer.

The minimum voltage is VSS and the maximum is VCC.

The terminology of RL/VL and RH/VH references the relative position of the terminal in relation to wiper mo

DATASHEET X9015 Low Noise, Low Power, Volatile Single Digitally Controlled (XDCP™) Potentiometer FN8157 Rev 6.00 August 14, 2015 The Intersil X9015 is a 32 tap potentiometer that is volatile.

The device consists of a string of 31 resistors that can be programmed to connect the RW/VW wiper output with any of the nodes between the connecting resistors.

The connection point of the wiper is determined by information communicated to the device on the 3-wire port.

The 3-wire port changes the tap po

X9015 Features

* 32 taps

* Three-wire up/down serial interface

* VCC = 2.7V

* 5V

* Operating ICC = 50µA max.

* Standby current = 1µA max.

* RTOTAL = 10k, 50k

* Packages 8 Ld SOIC, 8 Ld MSOP

* Pb-free plus anneal available (RoHS compliant) Pin