Datasheet4U Logo Datasheet4U.com

RD30LDT595 - 8-bit Serial-in Parallel-out LED Driver

Description

The RD30LDT595 has eight edge trigger D type Flip Flops with eight latches in 16

pin package.

serial data input and the clock pulse is input to the clock input.

Features

  • d.
  • Supply voltage range : 4.5 to 5.5 V, VO = 30V e.
  • Output current : IO = 100 mA (@VCC = 5 V).
  • All the logical input has hysteresis voltage for the slow transition. d.
  • Input with pull-up resistance. (Enable, Latch terminal) n.
  • Input with pull-down resistance. (CLK, S-in terminal).
  • Ordering Information me n Part Name Package Code Package Taping Abbreviation Package Type (Previous Code) Abbreviation (Quantity) m ig RD30LDT595PT0 DILP-1.

📥 Download Datasheet

Datasheet Details

Part number RD30LDT595
Manufacturer Renesas
File Size 698.95 KB
Description 8-bit Serial-in Parallel-out LED Driver
Datasheet download datasheet RD30LDT595 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RD30E Zener diode Excel Semiconductor
RD30E SILICON ZENER DIODES EIC
RD30E Zener Diode NEC
RD30EB ZENER DIODES SEMTECH
RD30ES Zener diode WEJ

Other Datasheets by Renesas

Part Number Description
RD30E 500mW PLANAR TYPE SILICON ZENER DIODES
RD30FM ZENER DIODES
RD30S ZENER DIODES
RD3.0E 500mW PLANAR TYPE SILICON ZENER DIODES
RD3.0FM ZENER DIODES

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RD30LDT595 8–bit Serial–in Parallel–out LED Driver IC REJ03D0906-0200 Rev.2.00 Jun 16, 2008 Description The RD30LDT595 has eight edge trigger D–type Flip–Flops with eight latches in 16–pin package. Data is input to the serial data input and the clock pulse is input to the clock input. When the clock is changed from ”L” to ”H”, the signal of the data input enters an internal shift register. The data of the shift register is shifted one by one. In addition, output load circuit is added so that power supply prevents a wrong action in on/off. When Vcc is less than a fixed level, the output (Q1 to Q8) compulsorily is off state. Low–voltage and high–speed operation is suitable for battery–powered product (e.g., notebook computers), and the low–power consumption extends the battery life.
Published: |