Datasheet4U Logo Datasheet4U.com

ISL6414 - Low-Noise LDO Regulator

Features

  • ultra low noise that does not typically exceed 30µV RMS to aid VCO stability. High integration and the thin Quad Flat No-lead (QFN) package makes ISL6414 an ideal choice to power many of today’s small form factor industry standard wireless cards, such as PCMCIA, mini-PCI and Cardbus-32. The ISL6414 uses an internal PMOS transistor as the pass device. The SHDN pin controls LDO1 and LDO2 outputs wh.

📥 Download Datasheet

Datasheet Details

Part number ISL6414
Manufacturer Renesas
File Size 592.88 KB
Description Low-Noise LDO Regulator
Datasheet download datasheet ISL6414 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISL6405 Dual Output LNB Supply and Control Voltage Regulator Intersil Corporation
ISL6406 Single Synchronous Buck Pulse-Width Modulation (PWM) Controller Intersil Corporation
ISL6406MR Enhanced Product (EP) Single Synchronous Buck Pulse-Width Modulation (PWM) Controller Intersil
ISL6406MV Enhanced Product (EP) Single Synchronous Buck Pulse-Width Modulation (PWM) Controller Intersil
ISL6426 Single Synchronous Buck Pulse-Width Modulation (PWM) Controller Intersil Corporation

Other Datasheets by Renesas

Part Number Description
ISL6410 Single Synchronous Buck Regulators
ISL6410A Single Synchronous Buck Regulators
ISL6411 Low-Noise LDO Regulator
ISL6412 Low-Noise LDO Regulator
ISL6413 Triple Output Regulator

Full PDF Text Transcription

Click to expand full text
ISL6414 OBSOLETE PRODUCT RECOMMENDED REPLACEMENT PART ISL6412 Triple Output, Low-Noise LDO Regulator with Integrated Reset Circuit DATASHEET FN9128 Rev 1.00 Aug 2, 2004 The ISL6414 is an ultra low noise triple output LDO regulator with microprocessor reset circuit and is optimized for powering wireless chip sets. The IC accepts an input voltage range of 3.0V to 3.6V and provides three regulated output voltages: 1.8V (LDO1), 2.84V (LDO2), and another ultra clean 2.84V (LDO3). On chip logic provides sequencing between LDO1 and LDO2 for BBP/MAC and I/O supply voltage outputs. LDO3 features ultra low noise that does not typically exceed 30µV RMS to aid VCO stability.
Published: |