Description
Pin
1
Name
ANT
Description
50 ohm antenna output.The antenna port impedence affects output power and harmonic emissions.An L-C low-pass filter may be needed to sufficiently filter harmonic emissions.Transmitter ground.Connect to ground plane.Digital data input.This input is CMOS compatible and should be driven with CMOS level inputs.Pins 4 provides operating voltage for the transmitter.VCC should be bypassed with a .01uF ceramic capacitor and filtered with a 4.7uF tantalum capacitor.N
Features
- n n n n n n Low-Cost 1.5-12V operation 5mA current consumption at 3V 0dBm output power at 3V Small size: .25” x .4” 4800 baud operation
Figure 1. Mechanical Drawing
Figure 2. Suggested Pad Layout
Preliminary
Rev Date: 5/21/01
1
Free Datasheet http://www. Datasheet4U. com
RCT-433-AS
Absolute Maximum Ratings Rating
Power Supply and All Input Pins Storage Temperature Soldering Temperature (10 sec)
1
Value
-0.3 to +15 -50 to +100 350
Units
VDC °C °C
Electrical Characteristics Characteristic.
RCT-433-AS-Radiotronix.pdf
