RPC2A - UHF Radio Packet Controller

Radiometrix

Datasheet Details

On receipt of a packet downloaded by the Host, the RPC2A will append to the packet: Preamble, start byte and a error check code.

of the RPC2A include extensive diagnostic/debug functions for evaluation and debugging of the radio and host driver software, a built in self test function and a sleep mode / wake-up mechanism which may be programmed to reduce the average current to less than 100µA. The operating parameters are fully programmable by the host and held in EEPROM, the host may also use the EEPROM as a general purpose non-volatile store for addresses , routing information etc. 1.1.

📁 RPC2A Similar Datasheet

Other Datasheets by Radiometrix

Published: Feb 10, 2009 |