STK672-732AN-E - 2-phase Stepper Motor Driver

ON Semiconductor

Datasheet Details

Built-in overcurrent detection function, overheat detection function (output current OFF).
FAULT signal (active low) is output when overcurrent or overheat is detected.
Built-in power on reset function. .
Phase signal input driver activated with an active Low and incorpororates a simulataneous ON prevention function. .
Supports schmitt input for 2.5V high level input.
Incorporating a current detection resistor (0.141Ω: resistor tolerance 2%), motor current ca.

📁 STK672-732AN-E Similar Datasheet

STK672-732A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
STK672-730A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
STK672-740A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
STK672-010 - Thick-Film Hybrid IC (Sanyo Semicon Device)
STK672-020 - Unipolar Fixed-Current Chopper (Sanyo Semicon Device)
STK672-040 - Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 1.5A) (Sanyo Semicon Device)
STK672-050 - Thick-Film Hybrid IC (Sanyo Semicon Device)
STK672-050-E - Stepping Motor Driver (Sanyo Semicon Device)

Other Datasheets by ON Semiconductor

Published: Feb 2, 2016 |